Kc-hilites KC #42302 2007-2013 JEEP WRANGLER (JK) H4 “DOT” HE Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Kc-hilites KC #42302 2007-2013 JEEP WRANGLER (JK) H4 “DOT” HE. KC HiLiTES KC #42302 2007-2013 JEEP WRANGLER (JK) H4 “DOT” HEADLIGHT CONVERSION KIT Instructions User Manual Manuel d'utilisatio

KC HiLiTES, Inc. Post Ofﬁce Box 155, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com

See details on our website at

www.kchilites.com

23 Year Warranty

2 - #4230 H4 HEADLIGHTS

2 - H4 PHILIPS 55/60W BULBS

1 - #6307 H13-H4 CONVERSION HARNESS KIT

• 10mm Socket/Wrench

• T15 Torx Driver

• Flathead Screwdriver

• Philips Screwdriver**

**Note: For earlier JK Models with Screw-type Retainer

Tabs, it requires a Philips Screwdriver.

Pop open your Hood. Using a 10mm wrench, <Disconnect>

the (-) NegaƟve Terminal from the baƩery.

<Locate> the Turn Signal Wire Harness behind the grill

through the wheel well and <Unlock> the connector by

pulling out the red locking tab.

<Unplug> the connector by pressing and holding the

release tab down while you pull it out.

Using the Flathead Screwdriver, <Remove> the (6) PlasƟc

Retainer Tabs located along the top of the grill shroud by

liŌing the plasƟc pins and gently prying the tabs out. (For

older model JKs, it will require using a Philips Screwdriver

to unscrew the plasƟc liŌ pins.)

#42302 HEADLIGHT CONVERSION KIT INCLUDES:

TOOLS REQ’D FOR INSTALLATION:

INSTALLATION:

<Remove> the Jeep Wrangler Grille by ﬁrmly pulling on

the lower part of the grille unƟl the retainer clips break

free of the chassis.

Using the T15 Torx Driver: <Remove> the (4) retaining ring

screws holding the headlight assembly in place.

<Pull> headlight assembly out to expose the wire harness

with connector. <Unplug> the headlight by unlocking the

connector by sliding out the red locking tab, press and

hold the release tab and disconnect the connector.

<Separate> the Retainer Ring from the OEM Headlight and

discard the OEM Headlight.

Take the H13-H4 Harnesses Adapter (#6307) and <Connect>

the Male H13 plug to the OEM Connector.

Take the KC H4 Headlight and <Connect> it to the H4

connector from the Harness Adapter (#6307).

The KC H4 Headlight is indexed to align with the Jeep

Wrangler Headlight Housing. Make sure the indexed tabs

are properly aligned before screwing the retainer ring

back into place using the original T15 Retainer Ring

Screws.

<Re-install> the Jeep Wrangler Grille by following Steps

(1-7) in reverse order.

Enjoy your New H4 Headlights!

Tip: There are (6) Press-In Retainer Clips holding the Jeep Grille

in place: (1) Located Above each turn signal (Le & Right) and

(5) located along the boom of the lower radiator support.

10.

11.

12.

#42302

2007-2013 JEEP WRANGLER (JK)

H4 “DOT” HEADLIGHT CONVERSION KIT

2007-2013 JEEP WRANGLER (JK) 1

Résumé du contenu

Page 1 - 2007-2013 JEEP WRANGLER (JK)

KC HiLiTES, Inc. Post Ofﬁce Box 155, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.comSee details on our website atwww.kchilites.com23 Y

Commentaires sur ces manuels

Pas de commentaire

Kc-hilites KC #42302 2007-2013 JEEP WRANGLER (JK) H4 “DOT” HE Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Kc-hilites KC #42302 2007-2013 JEEP WRANGLER (JK) H4 “DOT” HE. KC HiLiTES KC #42302 2007-2013 JEEP WRANGLER (JK) H4 “DOT” HEADLIGHT CONVERSION KIT Instructions User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Kc-hilites KC #42302 2007-2013 JEEP WRANGLER (JK) H4 “DOT” HE