Kc-hilites KC #7448 2000-06 Chev_GMC HD 2500_3500 Installatio Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Kc-hilites KC #7448 2000-06 Chev_GMC HD 2500_3500 Installatio. KC HiLiTES KC #7448 2000-06 Chev_GMC HD 2500_3500 Installation User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Thanks for choosing a KC HiLiTES product. We take pride in building the highest quality, best
engineered systems possible. Your satisfaction with our product is important, so if you have any
questions, please call our customer service line at 800-528-0950.
Parts Included:
1 - Light Bar 2 - M12 1.75 x
35mm bolt
1 - Instructions 3 - M12 Flat
washer
2 - 1/2” x 1 1/4” bolt 1 - Passenger
side frame bracket
2 - 1/2” lock washer 1 - Driver side
frame bracket
2 - 1/2” Nut 2 - 1” x 3 ½”
Spacer plate
2 - M12 1.75 x 50mm bolt
Installing the Bar
1. Locate the front tow hooks.
2. Remove both the bottom and inner bolts from each tow hook and discard.
3. Place an M12 flat washer on each of the M12 35mm bolts.
4. Install both driver and passenger frame brackets using one each side of the M12 1.75 x 35mm
bolts. NOTE - Do not install the inside bolts at this time.
5. Align the frame brackets with the single bolt hole on the bottom and the two holes on the inside
of the frame. NOTE - The rear bottom hole of the bracket will line up with the inside hole for the
tow hook and the rear inside hole of the bracket will line up with the inside hole for the tow hook.
6. Hold the light bar in position with the rear hole of the light bar lined up with the rear inside hole
for tow hook and frame bracket.
7. Insert a spacer on each side between the light bar and frame bracket, then start each of the
M12 1.75 x 50mm through the light bar, spacer, frame bracket and into the tow hook.
8. Place one of the supplied 1/2” bolts through each of the forward holes of the light bar, spacer
and frame bracket, then start the lock washer and nut.
9. Adjust the light bar up or down to the desired height and fit. NOTE - The light tabs on the bar
should parallel the lines of the truck.
10. Tighten all hardware.
You’re DONE! - - - - - - - Install your KC lights and enjoy.
Installation Instructions for
Front Light Bar KC 7447 & 7448
2000-06 Chev/GMC HD 2500/3500
KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC3266A - rev
IF YOU HAVE ANY PROBLEMS
OR QUESTIONS, PLEASE CALL
CUSTOMER SERVICE AT 800-528-0950
Photo A
Vue de la page 0
1

Résumé du contenu

Page 1 - 2000-06 Chev/GMC HD 2500/3500

Thanks for choosing a KC HiLiTES product. We take pride in building the highest quality, best engineered systems possible. Your satisfaction with our

Commentaires sur ces manuels

Pas de commentaire