Kc-hilites KC #6313 QUAD BEAM Installation Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Kc-hilites KC #6313 QUAD BEAM Installation. KC HiLiTES KC #6313 QUAD BEAM Installation User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Locate the two “L” shaped pins above the headlight on the
drivers side. Turn them toward the front of the vehicle and
pull them straight up. The unit will now be accessible for
wiring.
2. Mounting the Relay
Mount the relay and the black ground wire in the same place
on one of the bolts directly behind the headlight. This bolt will
offer a good ground for your Quad Beam. If you wish,
Thank you for choosing a KC HiLiTES product. We
you can use the sheet metal screw provided and
take pride in building the highest quality, best
mount the relay in a different location near
engineered systems possible. Your
the headlights.
satisfaction with our product is
important, so if there are any
3. Attaching the Wires
questions, please call our customer
Locate the yellow wire on the low
service line at 800-528-0950.
beam headlight and attach one T-
Tap connector by folding it over the
Parts Included in this Package:
wire and closing with a pair of pliers.
1 - Installation instructions
Find the purple wire and orange
1 - Relay w/terminated wires
wire on the high beam headlight
3 - T-Taps (for wire splice)
and attach one T-Tap as described
1 - Sheet metal screw
above to each of these wires. Match
each one of the Quad Beam wires from
NOTE - This Quad Beam installation is
the relay to the same color headlight
for most GM year 2000 model vehicles
wires that have T-Taps and push the
and later utilizing a switched grounding
connector firmly in place. (ensure they are
system for their headlights. If headlight wire
pushed in all the way)
colors are other than yellow, orange and purple, this
kit will not work on your vehicle.
4. Reinstall & Test Lights
Ensure all wires are clear of being pinched and then reinstall
1. Removal of the Headlight Module
headlight in the reverse order of removal. Test the system.
KC Part 6313
Quad Beam Installation Instructions
KC HiLiTES, Inc., 2843 West Avenida de Luces, PO Box 155, Williams, Arizona * 800-528-0950 * www.kchilites.com KC3264G - rev 052102
Orange
Yellow
Purple
Purple
Yellow
To
Headlight
Switch
Orange
Fuse
Black
Orange
Chassis
Ground
Relay
Quad Beam
Wiring Diagram
High Beam Low Beam
Vue de la page 0
1

Résumé du contenu

Page 1 - KC Part 6313

Locate the two “L” shaped pins above the headlight on the drivers side. Turn them toward the front of the vehicle and pull them straight up. The unit

Commentaires sur ces manuels

Pas de commentaire